TECO Power and Encoder Cables
400W TECOs
Because 400W cables and the original 400W motors without a gearbox are no longer available, use the following process to upgrade a 400W system.
If the motor, encoder cable, or power cable fails, you always have to replace all 3. For example, if a MT-040-302 (6CC401G-3DEBW-U) motor fails, you have to replace the motor, encoder cable, and power cable with completely new part numbers.
| Part Number | MFG Part Number | Replacement Plan | Notes | ||||
| MT-040-302-03 |
Option 1: Replace with 400W brake motor with original connectors
Must wire brake cable directly to 24VDC. Polarity does not matter. Must be enough space for a 132mm motor (36.6mm longer than the original).
Option 2: Replace with new motor with new connectors
|
||||||
| MT-040-302B-03 | DTS6C401C3AWBU000 | STOCK* | |||||
| MT-040-302G-03 | DTS6C401C3AWGUUA0 | STOCK* |
*In the future, if we run out of inventory, we may have to sell MT-040-302B and MT-040-302G.
Cables
| Part Number | MFG Part Number | Replacement Part | Notes |
| CPT-040-05-XX | |||
| STOCK | |||
| STOCK |
750W TECOs
For 750W motors we still have motors in stock, but we don't have the original power and encoder cables. So if a motor fails you can replace the motor. If the cable fails, you must repair the cable or replace the motor, power cable, and encoder cable.
| Part Number | MFG Part Number | Replacement Part | Notes |
| MT-075-302 | DTSB08751C2NTCDL1 |
STOCK*
|
|
| MT-075-302B | |||
*In the future, if we run out of inventory, we may have to sell JSMA-PLC08ABK (TSB08751C-2NT3-D). Shaft size is 16mm instead of 5/8".
Cables
| Part Number | MFG Part Number | Replacement Part | Notes |
| CBT-075-05 | DTY3FCB05MBRKCBD0 | STOCK | |
| CET-075-05 | DTY3FCB05M0PGCBD0 | STOCK | |
| CPT-075-05 | DTY3FCB05MUVWCBD0 | STOCK | |
| CBT-075-010 | DTY3FCB10MBRKCBD0 | STOCK | |