Wincore Rerail Router

Axis Zeroes

X:

Homes Positive towards the top of the Router.  Works in the negative machine (G53) space.

Part Zero is center of the tool at the bottom of the door.  Centered on the plastic surface that the door rests on when it's clamped. 

Y:

Homes negative, to the left, away from the operator.  Works in the positive machine (G53) space.

Part Zero is center of the tool at the left edge of the door farthest from the operator.  I used a 1:2:3 block to touch off the side of the fixture block. 

Z:

Homes positive (away from the door).  Works in the negative machine (G53) space.

Part Zero is the tool flush with the bottom of door