Skip to main content

Apollo III

Apollo III - IO Layout Chart

Here is the Apollo III IO layout chart Keywords: Apollo III, IO

Apollo III - Enable Troubleshooting Guide

Here is the Apollo III enable troubleshooting guide. Keywords: Apollo III, Enable, issues

Apollo III - Motion Troubleshooting Guide

Here is the Apollo III motion troubleshooting guide.   Keywords: Apollo III, Motion, Issues

Apollo III - Spindle Troubleshooting Guide

Here is the Apollo III spindle troubleshooting guide. Keywords: Spindle, VFD, Apollo III

2000 Series Apollo III Operating Manual

http://www.machmotion.com14518 County Road 7240, Newburg, MO 65550(573) 368-7399 • Fax ...

Electrical Enclosure Wiring Diagram - Apollo III

  File Type Document Name View / Download / Print Electrical Enclosure Wiring Diagram -...

Single Phase Yaskawa Drive and Motor Wiring Diagram Apollo III

  File Type Document Name View / Download / Print Single Phase Yaskawa Drive and Motor ...

Apollo III Not Communicating

Description of the problem: The Apollo III motion controller is not communicating, but all the s...

Three Phase Yaskawa Drive and Motor Wiring Diagram Apollo III

    File Type Document Name View / Download / Print Yaskawa Drive and Motor Wiring Dia...

Drive Fault Always On - Apollo III

Description of the problem: On Apollo series boards the X0 (Drive Fault) is always on whether th...

Match HiCon Serial Number With Mach4

Open "VSI Device Manager" in MachMotion Programs and Drivers. Click "Scan Network." (red box be...

Apollo Board Power Issues

24V Dropping Out (power light flashing/dim) Typically related to a "short" in limit switch....so...

HiCON Motor Drive Graph Blank

Description of the problem: The Motor/Drive Response graph is blank when motion is commanded. ...

HiCON Board Not Found

The hicon board is the "daughter" board of the Apollo III motion controller. The ethernet cable f...

Wiring Prox Switch Input

  PNP 3-wire example: (see attachment for photo) Brown to C0+ Blue to C0- Black to the input...

Wiring Switches and Inputs on Apollo

Inputs There are 16 inputs on the Apollo III (15 available for your use as X0 is reserved for th...

Apollo III Network Connections

  Apollo III Network Connection The Apollo III can be connected directly to the control or via ...

How to Update HiCON Firmware

The Following directions will help you properly update the firmware of the HiCon on an Apollo 3. ...