2000 Series HMI

__Use__MachMotion_Logo_HiRes_TransBG-update-01-450.png

 

 

This manual provides an overview the features of the 2050M control.

 

1. Overview

2000_Overview.jpg2000_OverviewProfile.jpg

The 2000 series control is an Industrial PC control with an integrated 21.5" touch screen and membrane operator panel.

2. Connections

1. Machine interface

These are the only required connections to make to the control before you turn it on.

fkE2000_Ethernet.jpg

Cable

Function

Blue EtherCAT Cable

Connection to EtherCAT Network (EtherCAT Servo Drives)

Green Ethernet Cable

Connection to Ethernet IP Network (VFD, PLC, Motion Control)

Blue Ethernet Cable

Internet

Black Cable

Control Power 

Grey 2 Conductor Cable

E-Stop *

*Additional Estop buttons must be wired in series with this one.

 

 

 

 

2.User Available USB

hmX2000_ExternalUSB.jpgLpP2000_KeyboardPlug.jpg

External USB on the face of the control for loading files with a Flash Drive or temporary use with any other auxiliary USB device. One External port underneath the keyboard tray for wireless keyboard and mouse.

3. Specifications

1. Data Sheet

Item

Specification

Power Source

DC 15V- 30V 2.4 amps

Operating Temperature

0°C to 40°C [32°F to 104°F]

 

 

Operating System

Microsoft Windows IOT (Compare to Windows 10)

Software Package

MachMotion Control Software Installed, Powered By Mach4 Software Core

Processor

Intel I3 (2.7GHz)

Hard Drive

64 GB Solid State, mSATA

RAM

8 GB

Wifi

External antenna

Ethernet LAN (RJ45) Port

1 (Networking and internet)

USB Ports

1 (External) 2 (Internal)

Monitor

21.5" Capacitive Touch Color LCD

Resolution

1920 X 1080

Keyboard

Wireless - Full QWERTY with numpad

Mouse 

Wireless - Optical mouse with scroll wheel

Enclosure

 

Dimensions

23.125"(W) X 20.0"(H) X 3.25"(D)

Material

18 Gauge Steel, Powder Coated Skin. Machined Aluminum Face

Weight

46.5 Pounds

Operator Interface

 

X15-14-21 Operator Panel

Membrane button panel with Jog, Spindle, Coolant, Feed selections, Emergency Stop, Cycle Start, Feed Hold, and Reset Buttons

X15-41-01 Wireless Pendant (Optional) Wireless Hand-wheel 
2. Mechanical Drawingsdimensional_drawing.png

4. Operator Panel

1. Emergency Stop

Emergency Stop should be used in the event of an emergency and as a safety precaution any time the machine isn't running. Emergency Stop will not lose position of machine or require rehoming.

2. Cycle Control

Cycle Start can be used to start a GCode file and is also used to start other commands such as MDI and GoTo Commands.

Feed Hold is used to pause motion during file run and will leave the spindle on. Cycle start will resume motion and continue file execution. 

3. Cycle Cancels

Retract is an optional feature, currently in development and not operational. Check in with MachMotion for more information!

Cycle stop does a full cancel of the file, turns off the spindle and coolant, and puts the machine in idle.

Reset is used to clear alarms and set the machine back to default modals. These defaults can be changed in the Initialization Codes sections of the default control configuration. Reset also does a full cycle stop and rewinds the GCode file.

It is also the "Power" button. If the control is off, pressing Reset will power it on.

4. Feed Rate Overrides

The Feedrate Override knob will modify Feedrate Override percent and will affect any G01 feed rate moves. The feedrate percentage value is shown on the screen. If you are expecting motion and nothing is going, verify your feedrate is not set to 0%.

The 4 Rapid Override buttons will set the Rapid Override percent and will affect any G00 rapid rate moves. The percentages for each can be changed in the X15-[##] Operator Panel settings. You can access this from the Service section, then Maintenance tab, then Interface Config button:

rapid-rate-settings

5. Spindle Control

Spindle control buttons let you directly set the spindle forward, backwards, and stop. These are equivalent to calling M3, M4, and M5. You can set a default spindle speed value that will be set any time the system is initialized (reset pressed) by adding S### (where ### is the desired speed) in the Initialization Codes sections of the default control configuration. 

Coolant buttons allow you to toggle the mist and flood outputs. These are equivalent to calling M7, M8, and M9

6. Function Buttons

These 8 buttons can be set up for user selected features. 

7. Jog Selection

CONT will put all jogging into continues mode and will continue to jog as long as you hold the jog button.

X1, X10, and X100 are incremental jogs and will move the incremental distances configured in Config -> Control

8. Jog Group

These buttons are for jogging the machine. The 4,5,6 buttons can be assigned to any auxiliary axis you have. The jog rate knob can be used to adjust the speed of the jog while jogging the machine. There is not a percentage or display of this jog rate on the screen.

 

Warranty Information

MachMotion warranty policy is subject to change. Updated information is available at our website:
https://machmotion.com/warranty

 

The MachMotion Team
http://www.machmotion.com
14518 County Road 7240, Newburg, MO 65550
(573) 368-7399 • Fax (573) 341-2672

Back to top