Search Results

1. Overview  ALEXSYS is a programming system for CNC machining centers. That combines features of CAD / CAM systems with typical features of conversational programming. It is not necessary to be experienced with CAD/CAM systems to use this software. Some ...

Problem: Motion continues before stopping when setting feedrate to 0%. Issue: Motion is commanded with a buffer (a storage of moves). Otherwise it would pause between moves. When you turn to 0% it is just changing the feedrate to a zero, but still completes...

Suggestion is they get a lightstack with audible option. The sheet below has info on that. They can goto/call automation direct for more. https://cdn.automationdirect.com/static/specs/patlite40mmLR4.pdf https://cdn.automationdirect.com Or If they want to u...

Problem:  When moving the MPG Pendant really fast and it continues in the same direction or the same speed. Resolution: Inches: You will need to change the 0.01 to 0.05 Metric: You will need to change the 0.1 to 0.5 Keywords: 16025

WARNING!  Improper installation of this motion controller can cause DEATH, INJURY or serious PROPERTY DAMAGE. Do not attempt to install this controller until thoroughly reading and understanding this manual. 1  INTRODUCTION 1.1    Overview The Apollo ...

Here is the machine coordinate direction guide. Keywords: going the wrong direction, coordinate, axis direction

To view additional documentation visit: www.support.machmotion.com Documents Box:  Most controls will ship with a smaller cardboard box. This box may contain manuals, cables, and more that would make for a good starting point of your install Backups:  For al...

On older controls, this feature was known as Global Messaging System. Configuration Access the Global Monitoring System To set up the Global Monitoring System go to Configuration -> Plugins -> Global Monitoring System. Monitor Control There are five a...

Warning: This manual needs to be updated. The connector pins are incorrect. CN1 Pin 3 is actually SI1 and CN1 Pin 6 is actually SO1.  File Type Document Name View / Download / Print Drive Interface Board Diagram for Yaskawa Launch ...

1. Introduction This manual covers the setup and installation of the 2000 Series Mounting Arm Assembly. Included: (1 ea) ½”-13 x 4 ½”” Socket Head Cap Screw(1 ea) ½”-13 Nylon Lock Nut(3 ea) 7/16” Bronze Washer, 1.125” OD(2 ea) 7/16” Steel Washer, 1.12...

Description of the problem: What are the correct post files for use with SheetCAM?   Solution:   Machine Type Post File Name Router Mach3.scpost Mach3 Plasma/Oxy Fuel MachMotion Plasma THC Version4.scpost Mach3 Water ...

To check the current motor code in a TECO servo drive, press the Mode button until you see dn-01. Use the up arrow buttons to set the drive to dn-08. Hold down the Enter button until the screen changes. Verify that the motor code is correct according to the ...

Introduction This manual gives the process for basic operation of a using the Lathe MachMotion control. The screen is shown below, followed by a brief summary of the different features of the screen. The number shown in the screenshot refers to a brief desc...

Running a G-Code File with the "File Resume" or "Run From Here" Option If for whatever reason a program needs to be started in the middle, use the Run From Here feature by following these steps: Use the Up/Down arrows in the G-Code file window to select th...

Contents Each kit consists of these parts pictured below.  Locate these parts before disposing of any packing. 1. Wireless receiver Antenna. 2. Antenna extension cable.  (Already installed on MachMotion 2000 series controls) 3. Wireless pendent USB receive...

This installation of a MachMotion control upgrade is the same process no matter what machine type, make or model. Please use the following manual as your guide to locate and mark the old wiring, remove the original system and install the new MachMotion compl...

1 Overview The MachMotion micro-stepping drive is used to control all different types of stepper motors. This document will give you all the information you need to connect your motors to your drives. The drives are wired using simple screw terminals as s...

The Unimate Release Mach 4 Build  5609 MachMotion Version 3.0 HiCON F/W 5.66 HiCON Plugin 2.50.63 HiCON FPGA 9AC8 RapidSetup Version 10.6.4.0 INtime Version 6.4.21350.1 Alexsys Version 4.1.0.399 ...

1. Introduction 1.1 Control Startup To open the control software double-click on the Lathe profile icon on the desktop. Figure 1 – Control Icon 1.2 Overview This manual gives the process for basic operation of a Lathe using the MachMotion control. T...

Commands The system has many packaged functions called commands. These commands can perform a variety of actions, such as turning on the spindle or zeroing an axis. All commands have an action associated with them. Some actions also have a feedback associated...