Search Results

Mitsubishi D700 VFD has a feature to check past faults To view a past fault follow these steps: Press the Mode button until E--- is displayed on the screen.  The past 8 faults can be displayed by spinning the settings dial. Use the following chart to navigate...

  Apollo III Network Connection The Apollo III can be connected directly to the control or via an Ethernet router. Either of the two Ethernet ports on the Apollo III can be used. The Ethernet ports have a built in Ethernet switch so you can also use them to ...

Here is an image of the IO chart for an Apollo I board.     Keywords: Apollo I board, IO chart, Outputs, Inputs

Below is the enable troubleshooting guide for Apollo I breakout board. After reviewing the Enable Troubleshooting flow chart here are some other items to look for on the computer. Install parallel port drivers (run the mach3 install software, selecting on...

Here is the Apollo I Motion Troubleshooting Guide     Keywords: Apollo I, Motion, Troubleshooting, issues

Here is the Apollo I spindle troubleshooting guide.   Keywords: Apollo I, Spindle, Troubleshooting, issues

Here is the Apollo III IO layout chart Keywords: Apollo III, IO

Here is the Apollo III enable troubleshooting guide. Keywords: Apollo III, Enable, issues

Here is the Apollo III motion troubleshooting guide.   Keywords: Apollo III, Motion, Issues

Here is the Apollo III spindle troubleshooting guide. Keywords: Spindle, VFD, Apollo III

Here is the machine coordinate direction guide. Keywords: going the wrong direction, coordinate, axis direction

  File Type Document Name View / Download / Print TSTA Drive Overview Launch     Keywords: Teco, drive, overview 

1. Introduction 1.1 Control Startup To open the control software double-click on the Lathe profile icon on the desktop. Figure 1 – Control Icon 1.2 Overview This manual gives the process for basic operation of a Lathe using the MachMotion control. T...

Chapter 1: Introduction G-Code is a special programming language that is interpreted by Computer Numerical Control (CNC) machines to create motion and other tasks. It is a language that can be quite complex at times and can vary from machine to machine. The...

1. Overview  ALEXSYS is a programming system for CNC machining centers. That combines features of CAD / CAM systems with typical features of conversational programming. It is not necessary to be experienced with CAD/CAM systems to use this software. Some ...

  File Type Document Name View / Download / Print TSTA User Manual Launch     Keywords:  TSTA, Teco error teco list teco, alarm, codes manufacturer, mfg

Here is an example wiring diagram for Apollo I board (click image to enlarge). Also, a PDF is attached for you to be able to download and print it.        Keywords: schematic, diagram, teco motor, drive, apollo I  

1 Introduction This guide will discuss the basic steps in using SigmaNEST to create a cut file for use with MachMotion’s 1150P plasma control. Users have the option to either import a .dxf file or select from the SigmaNEST shape library. MachMotion has an ...

WARNING!  Improper installation of this motion controller can cause DEATH, INJURY or serious PROPERTY DAMAGE. Do not attempt to install this controller until thoroughly reading and understanding this manual. 1  INTRODUCTION 1.1    Overview The Apollo ...

The Unimate Release Mach 4 Build  5609 MachMotion Version 3.0 HiCON F/W 5.66 HiCON Plugin 2.50.63 HiCON FPGA 9AC8 RapidSetup Version 10.6.4.0 INtime Version 6.4.21350.1 Alexsys Version 4.1.0.399 ...