Skip to main content

Run From Here

Running a G-Code File with the Run From Here Option

If for whatever reason a program needs to be started in the middle, use the Run From Here feature by following these steps:

  1. Use the Up/Down arrows in the G-Code file window to select the line to start from (Figure 6)from.
  2. Press the [File Resume] or [Run From Here] button to bring up the window (Figure 6)1).
  3. Select the [Change to Needed Tool] button if applicable (Figure 9)applicable.
  4. Enter desired value in the Feed Rate field (Figure 9)field.
  5. Select axis to move and press [Move Selected] button (Figure 9) to move the axis into positionnew starting position.
  6. Select desired Auxiliary Settings and press [Turn On Selected Auxiliaries] button (Figure 9)button.
  7. Press [Cycle Start] to begin the file at selected starting line (Figure 6)line.

Figure-9---Run-from-here.JPG
Figure 91 – Run from here

 

 

Back to top