Run From Here

Running a G-Code File with the Run From Here Option

If for whatever reason a program needs to be started in the middle, use the Run From Here feature by following these steps:

1. Use the Up/Down arrows in the G-Code file window to select the line to start from (Figure 6)
2. Press the [Run From Here] button (Figure 6)
3. Select the [Change to Needed Tool] button if applicable (Figure 9)
4. Enter desired value in the Feed Rate field (Figure 9)
5. Select axis to move and press [Move Selected] button (Figure 9) to move the axis into position
6. Select desired Auxiliary Settings and press [Turn On Selected Auxiliaries] button (Figure 9)
7. Press [Cycle Start] to begin the file at selected starting line (Figure 6)

Figure 9 – Run from here