Trio Drive Setup

Programming

Download Motion Perfect (Motion Program Development System) from Trio's website (https://www.triomotion.com/system/downloadPage.php?location=%2Fsoftware) . 

Install on your control. 

Program with default parameters. 

Main used parameters: 

Parameter	MachMotion Default	Notes
Pn007.1	1	Set to 0 for single phase. -for 1.5kW drive will apply an 80% de-rate -or 2.0kW and 3.0kW single-phase is not supported Set to 1 for three phase.
Pn002.2	0	0 [Default] Use the encoder as an absolute encoder (requires encoder battery) 1 Use the encoder as an incremental encoder

Reset Absolute Encoders

Follow the procedures below when powering up an absolute encoder system. 

Wiring