MachPro Mill and Router Setup Manual
{{@2007#bkmrk--1}}
MachPro 26 CNC Software Roadmap
Configure Software
Please refer to your motion controller's documentation to:
- Establish the network connection to the MachPro computer
- Connect and configure drives
- Connect and configure I/O
- Calibrate the axes
- Establish machine zero
- Configure soft limits
- Calibrate the Spindle
Some of these configuration steps need integration with the MachPro software. The M31 Motion Control Setup Manual includes the information you need for the M31. Compatible motion controllers should complete the MachPro Compatible Motion Controller Configuration Settings
Languages
{{@2205}}
Spindle Calibration
This is primarily for mills where the speeds and feeds are precise, and directly affect the finish and accuracy of the final part. Spindle speeds on routers are usually not as precise.
Spindle Settings
{{@2047}}
Global Monitoring System (GMS)
{{@2002}}
Lube System Setup
{{@2046}}
Tool Setters and Offsets
{{@1995}}
Probing Wizard
{{@2015}}
Modifying GoTo Positions
{{@2045}}
Tool Changers
{{@1999}}
{{@1998}}
Drill Bank Setup and Operation
Other Machine Settings
Pull down Configure -> Control and select the Settings Tab and scroll down to the Machine section
Work Light Output
Pull down Configure -> Control and select the Settings Tab and scroll down to the Work Light section
Additional Information
For information about MachPro Software Operation please see the MachPro Mill/Router Operating Manual
{{@2016}}