Page Revisions

Listed below are all the past revisions of this page. You can look back upon, compare, and restore old page versions if permissions allow. The full history of the page may not be fully reflected here since, depending on system configuration, old revisions could be auto-deleted.

Sort

#

Page Name / Editor Type

Created By / Revision Date

Changelog

Actions

# 46

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

16 June 2026 14:40:47 (2 weeks ago)

add link to work and head shift offsets

Changes | Current Version

# 45

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 May 2026 21:34:08 (2 months ago)

Changes | Preview

# 44

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 May 2026 21:31:02 (2 months ago)

Changes | Preview

# 43

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

1 May 2026 19:51:20 (2 months ago)

Changes | Preview

# 42

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

1 May 2026 19:39:11 (2 months ago)

add links

Changes | Preview

# 41

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

24 March 2026 21:59:13 (3 months ago)

Changes | Preview

# 40

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

24 March 2026 21:54:05 (3 months ago)

Changes | Preview

# 39

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

24 March 2026 21:32:10 (3 months ago)

System auto-update of internal links

Changes | Preview

# 38

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

24 March 2026 21:16:05 (3 months ago)

System auto-update of internal links

Changes | Preview

# 37

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

19 March 2026 20:45:57 (3 months ago)

Changes | Preview

# 36

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

19 March 2026 20:44:34 (3 months ago)

add blum probing routines

Changes | Preview

# 35

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

19 March 2026 19:13:33 (3 months ago)

add languages

Changes | Preview

# 34

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

12 January 2026 17:14:22 (5 months ago)

switch widgets from include to link

Changes | Preview

# 33

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

9 January 2026 21:21:34 (5 months ago)

System auto-update of internal links

Changes | Preview

# 33

MachPro Mill and Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

9 January 2026 21:21:34 (5 months ago)

Changes | Preview

# 32

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

9 January 2026 21:07:49 (5 months ago)

System auto-update of internal links

Changes | Preview

# 31

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

19 December 2025 17:28:15 (6 months ago)

include block delete

Changes | Preview

# 30

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

18 December 2025 16:49:38 (6 months ago)

System auto-update of internal links

Changes | Preview

# 29

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

16 December 2025 18:01:07 (6 months ago)

Changes | Preview

# 28

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

16 December 2025 17:58:25 (6 months ago)

add include for tool changer override

Changes | Preview

# 27

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

12 December 2025 21:55:31 (6 months ago)

Changes | Preview

# 26

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

11 December 2025 16:16:26 (6 months ago)

remove duplicate sections at the end

Changes | Preview

# 25

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

9 December 2025 22:40:48 (6 months ago)

Changes | Preview

# 24

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

8 December 2025 17:52:39 (6 months ago)

Changes | Preview

# 23

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

8 December 2025 16:08:10 (6 months ago)

Changes | Preview

# 22

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 22:01:13 (7 months ago)

Changes | Preview

# 21

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 21:54:58 (7 months ago)

System auto-update of internal links

Changes | Preview

# 20

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 21:38:37 (7 months ago)

System auto-update of internal links

Changes | Preview

# 19

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 21:08:12 (7 months ago)

Changes | Preview

# 18

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 21:07:05 (7 months ago)

include tool and setter doc

Changes | Preview

# 17

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 20:54:18 (7 months ago)

rough including tool table and tool offsets

Changes | Preview

# 16

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 20:44:07 (7 months ago)

Changes | Preview

# 15

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 17:12:33 (7 months ago)

Changes | Preview

# 14

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 15:21:12 (7 months ago)

System auto-update of internal links

Changes | Preview

# 14

MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 15:21:12 (7 months ago)

Changes | Preview

# 13

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

5 December 2025 14:37:38 (7 months ago)

System auto-update of internal links

Changes | Preview

# 12

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

4 December 2025 20:46:42 (7 months ago)

Changes | Preview

# 11

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

4 December 2025 20:45:46 (7 months ago)

Changes | Preview

# 10

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

4 December 2025 20:39:55 (7 months ago)

Changes | Preview

# 9

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

4 December 2025 18:21:10 (7 months ago)

point probe at included doc with machmotion removed

Changes | Preview

# 8

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

4 December 2025 17:59:55 (7 months ago)

System auto-update of internal links

Changes | Preview

# 7

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

4 December 2025 17:59:45 (7 months ago)

System auto-update of internal links

Changes | Preview

# 6

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

4 December 2025 17:58:55 (7 months ago)

update screens with bigger numbers, include for probing

Changes | Preview

# 5

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

2 December 2025 20:57:50 (7 months ago)

update screen for fixtures tab, manual setup

Changes | Preview

# 4

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

2 December 2025 20:44:22 (7 months ago)

update tool tab screen and notes

Changes | Preview

# 3

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

2 December 2025 20:24:32 (7 months ago)

update descriptions for gcode tab

Changes | Preview

# 2

PRIVATE MachPro Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

2 December 2025 19:47:54 (7 months ago)

update logos and machmotion

Changes | Preview

# 1

2000 Series Mill/Router Operating Manual
(Editor Type: WYSIWYG)

Joel Eland

2 December 2025 19:41:49 (7 months ago)

Initial publish

Changes | Preview

Back to top