Search Results

There are 2 configuration options: Homing with Home/Limit switch on the Master: First: In the Mach4 software go to Configure=>Control=>Axis Mapping Select which motor is the slave under Slave 1 Second: Configure=>Plugins=>HiCON Select the motor that you w...

This only applies to master and slave axes on a gantry. If you are trying to align the tables on a dual table router, use the home offsets in the Mach4 control | Homing / Soft Limits tab. To align the gantry, the master and slave axes need to home, then the s...

Updating for M31 2026-05-12-T16-06 This needs to be merged into a single master slave setup, homing, aligning doc This only applies to master and slave axes on a gantry. If you are trying to align the tables on a dual table router, pull down Configure -> Con...

This only applies to master and slave axes on a gantry. If you are trying to align the tables on a dual table router, use the home offsets in MachPro. Pull down Configure -> Control ->  Homing / Soft Limits tab. To align the gantry, the master and slave axes ...