Recently Updated Pages

Running a Mitsubishi VFD Directly

Description of the problem: It may be necessary to run a VFD manually from it's control inte...

Revision #5
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Terminal Block Usage How to connect wires

Use a small flat screwdriver to push back the metal clip. It will likely take a good bit of press...

Revision #4
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

External Divider Setup - Mach3

To setup mach3 plasma control unit with divided voltage:   On the square ~4x4 Sound Logic boar...

Revision #3
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Torch Crashing on Probe-Mach3

Description of the problem: My torch is crashing on the probe and I don't know why.   Sol...

Revision #5
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Loading XML Profile in Ultimate Screen

Description of the problem: The Ultimate screen gets hung up on "Loading XML Profile."   So...

Revision #7
Created 2 years ago by Aaron
Updated 1 month ago by Nate Hall

Ultimate Screen Not Loading

Description of the problem: The Ultimate screen does not load properly (gets stuck).   So...

Revision #3
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Tool Change Option-Mach3

Description of the problem: My setting for "Ignore Tool Change" keeps changing back to "Stop...

Revision #4
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Spindle Brake Setup-Mach3

Description of the problem: I'm trying to set up my spindle brake.   Solution: To ...

Revision #5
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Wiring Up A VFD Alarm to E-Stop Mach3

Description of the problem: I would like for Mach3 to E-Stop when a VFD alarm occurs.   S...

Revision #3
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Rotational Axis Configuration-Mach3

Description of the problem: How do I set up a rotational axis?   Solution: Only axes A, ...

Revision #5
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Spindle Turning off Intermittently-Mach3

Description of the problem: The spindle is turning on/off intermittently    Solution: I...

Revision #5
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Program Safety Lockout-Mach3

Description of the problem: What is program safety lockout?   Solution: Program safety l...

Revision #5
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Persistent Tool Number-Mach3

Description of the problem: Every time Mach3 is restarted it forgets which tool is in the mach...

Revision #5
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Macropump Issues-mach3

Macropump is not working correctly.   - If the debounce is set too high...

Revision #4
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Reversing Pendant Direction Mach3

Description of the problem: The axis is moving in the opposite direction that you are comman...

Revision #5
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Inverse Feed Rate G93 in Mach3

Description of the problem: Confusion on how to use inverse feed rate.   Solution: Inver...

Revision #3
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

How to Reset the PC Power Supply

Description of the problem: The PC fan isn't running, all power appears to be off (even though...

Revision #4
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Homing Limits Window-Mach3

  Reversed Checking this option on an axis will change the direction the machine moves. S...

Revision #5
Created 2 years ago by Aaron
Updated 1 month ago by Josiah Ymker

Control PC Beeping

Description of the problem: Control is beeping.   Solution: If a control is beeping it is pr...

Revision #4
Created 2 years ago by Aaron
Updated 1 month ago by Nate Hall

Quick-Start Tips

To view additional documentation or for support from a MachMotion Support Representative, visit:h...

Revision #11
Created 1 year ago by Dan
Updated 1 month ago by Aaron
Back to top