How to Turn Off Home In Place

Home in place is a feature that allows the servo motorsaxes to home in their current position. This is usually used for testing purposes. purposes or if you will not be using limit/homing switches. (NOTE* MachMotion strongly recommends only running with homing/limit switches).

This option must be turned off beforefor setting up homingyour machine to home off of a limit switch.

Go to Configure>Mach> menu option, then select the Homing/Soft Limits and un-check "Home In Place". for each axis.

 

Keywords: Homing in place, doesn't home, no movement when homing