Change IP Parameters On V1000

Change IP Parameters On V1000

Correct parameters:

• F7-13-0
• F7-03-208
• F7-04-90
• B1-01-3
• B1-02-3

Follow these instructions:

1. Press down arrow until screen reads "PAR." Press Enter.

2. Press down arrow the screen reads "F7-01."

3. Press ">Reset" two times until "01" is flashing.

4. Press the up arrow until the value reads "13." Press Enter.

5. Use the arrow to change the value to "00." Press Enter. The screen will flash "End" and go back to the previous screen.

6. Use steps 4 and 5 to change the remaining parameters:

       -Change F7-03 to "208"

       -Change F7-04 to "90"

7. Press "ESC' until the screen reads "F7-01." Press the down arrow until the screen reads "b1-01."

8. Use steps 3 to 5 to change the remaining parameters:

       -Change B1-01 to "3"

       -Change B1-02 to "3"