Skip to main content

How To Access Delta Parameters Manually

If you need to get into a delta "B" series VFD and don't have a cable and software this is how.


 

*The delta manuals and their links are attached to this page*




When powering up it should look like this.

image.png




1: Press "Prog/Data" and it should look like this 

image.png



2:Now pressing the up and down keys will allow you to cycle through the parameter groups (there are 11 total)

image.png



3:Once you find the group you want press "Prog/Data" and it should look like this allowing you to select the parameters within that group using the Up/Down keys

image.pngimage.png




4:Once you find the desired Parameter press Prog/Data to display it's value, you can then also adjust the value using the arrow keys.

image.png



5:When you are done with the parameter press Prog/Data again, the screen will briefly flash "-End-" and then display the parameter selection screen again.

image.png



6:when you are done recording or adjusting the parameters is this group press "Mode" to return to the group selection page.

image.png



7: Return to step 2 repeat for any other groups you want to access.

8: when finished cycle power the the VFD and confirm that it works