How to complete a Manufacturing Order

You will need to be in the Manufacturing Order you are working on.

Go into Transfers (top of page) and go into the "PC".

You will need to "Check Availability" to reserve the parts to the "MO".

Physically go pick the parts and then come back and "Validate" the "PC" or you can pick from one of the handheld devices and pick and validate at once.

After the work is complete, go into the "MO" and put time into the "Work Order" tab.

With time entered and all parts confirmed they are picked, "Produce All" and this will close out the "MO" (If consumption warning comes up hit confirm if changes are what they should be).

Back in the "Transfers" we need to store the finished product "SFP". All that is needed here is to enter the "Destination Location", typically "-Quality Control" will be the final location.

Once location is entered, then we just "Validate" the "Transfer" and you are done!