Queue

Flow of Queue

1. Operator either scans barcode or enters schedule and ID manually.
2. If manual add is toggled on then before adding to queue, data is put into DRO's on screen for operator editing. Editing done here doesn't change the actual csv data is pulled from but changes the LUA table that has been loaded. Will keep changes until table gets reloaded. (EX: Compile Scripts, restart Mach)
3. If operator enters 0 for the ID then all ID's in the schedule are loaded into the queue.
4. Depending on the machinemachine, different data is gathered and different functions are used to add the ID to the queue.
5. The top item of the queue is always ran first. Items can be moved up and down to change their order.
6. Pressing "Cycle Start" posts, loads and runs the gcode. Pressing "Post" only posts and loads the gcode.