Baserow Explanation
Table Overview
Quick explanation of the contents of the tables
Model
This is where user created door models live. They are viewed/edited/created here. This tables uses the data found in the other tables for a simple model creating process. An explanation for how to make a model can be found here: Creating A Model
Slab
Describes door slabs using height and width.
Material
Feed rate data for cutting each type of material.
Location
Data on where to place hinges/strikes, how many hinges and hinge thickness.
Hinge
Hinge data used to describe a hinge to gcode creating software.
Lock
Lock data used to describe a lock to gcode creating software.
Latch
Latch data used to describe a latch to gcode creating software.
Panic
Panic data used to describe a panic to gcode creating software.
Hole_Pattern
Repeated hole patterns found in locks to be used in Lock.
Table Explanations
In-depth look into the different tables. Describing what each of their columns do.
Model
Name
Unique identifier for a door model.
Barcode_Name
Optional name for a door model that can be turned into a barcode. This name should follow standard barcode. conventions.
Description
Short description describing the door model.
Swing
Option selector for each type of door swing. The only part that matters for machine operation is that all right hand doors are referenced from the bottom instead of the top.
LH - Left Hand
RH - Right Hand
RHR - Right Hand Reverse
LHR - Left Hand Reverse
LHI - Left Hand Inactive
RHA - Right Hand Active
RHRA - Right Hand Reverse Active
ERHRI - Egress Right Hand Reverse Inactive
ELHRA - Egress Left Hand Reverse Active
Slab
Which slab to use for a model. Lets you pick from created slabs in Slab.
Panic
Which panic to use for a model. Let's you pick from created panics in Panic.
Panic_CL
How far the panic device center line will be from the top of the door. Only needed if a panic device is selected.
Location_Set
Which location set to use for a model. Let's you pick from created location sets in Location_Set.
Hinge
Which hinge to use for a model. Let's you pick from created hinges in Hinge.
Lock
Which lock to use for a model. Let's you pick from created locks in Lock.
Material
Which material to use for a model. Let's you pick from created materials in Material.
Notes
Any notes about a model can be written here.
Slab
Slab - The blank piece of wood from which the door is cut out of
Name
Unique identifier for a slab.
Width_Nominal
"Pretty" representation of the slabs actual width
Height_Nominal
"Pretty" representation of the slabs actual height
Width_Actual
Actual width of slab
Height_Actual
Actual height of slab
Material
Name
Unique identifier for a material.
Feed
Decimal between 0-1 representing a percent factor on the feed rate when cutting.
Plunge_Feed
Decimal between 0-1 representing a percent factor on the feed rate when plunging.
Lock_Feed
Decimal between 0-1 representing a percent factor on the feed rate when cutting the lock.
Lock_Plunge_Feed
Decimal between 0-1 representing a percent factor on the feed rate when plunging the lock.
Thickness
Thickness of material
Cut_Spindle_Speed
Decimal between 0-1 representing a percent factor on the spindle speed.
Location
Name
Unique identifier for a location set.
Hinge_Size
Height of hinge to be used with location set(UNUSED)
Hinge_Backset
Distance of hinge from edge of door
Hinge_Thickness
Distance hinge is cut into door
Top_of_Door_to_Hinge_1
Distance from the top of the door to the top of the first hinge
Top_of_Door_To_Hinge_2
Distance from the top of the door to the top of the second hinge
Top_of_Door_To_Hinge_3
Distance from the top of the door to the top of the third hinge
Top_of_Door_To_Hinge_4
Distance from the top of the door to the top of the fourth hinge
Top_of_Door_To_Hinge_Strike
Distance from the top of the door to the middle of the strike