Baserow Explanation
Table Overview
Quick explanation of the contents of the tables
Model
This is where user created door models live. They are viewed/edited/created here. This tables uses the data found in the other tables for a simple model creating process. An explanation for how to make a model can be found here: Creating A Model
Slab
Describes door slabs using height and width.
Material
Feed rate data for cutting each type of material.
Location
Data on where to place hinges/strikes, how many hinges and hinge thickness.
Hinge
Hinge data used to describe a hinge to gcode creating software.
Lock
Lock data used to describe a lock to gcode creating software.
Latch
Latch data used to describe a latch to gcode creating software.
Panic
Panic data used to describe a panic to gcode creating software.
Hole_Pattern
Repeated hole patterns found in locks to be used in Lock.
Table Explanations
In-depth look into the different tables. Describing what each of their columns do.
Model
Name
Unique identifier for a door model.
Barcode_Name
Optional name for a door model that can be turned into a barcode. This name should follow standard barcode. conventions.
Description
Short description describing the door model.
Swing
Slab
Option selector for each type of door swing. The only part that matters for machine operation is that all right hand doors are referenced from the bottom instead of the top.
LH - Left Hand
RH - Right Hand
RHR - Right Hand Reverse
LHR - Left Hand Reverse
LHI - Left Hand Inactive
RHA - Right Hand Active
RHRA - Right Hand Reverse Active
ERHRI - Egress Right Hand Reverse Inactive
ELHRA - Egress Left Hand Reverse Active
Panic
Panic_CL
Location_Set
Hinge
Lock
Material
NotesSlab