Tool Offset Table Customization

Tool X and Y Offsets

SelectPull down View->Tool Tables...Tables Youto will seeopen the tool table. 

Select Edit->Table Fields.Fields Youto will seeopen the Tool Table Editor. 

Select the Optional Field Tab. 

Then select the key name XOffset and press Move Pri.Pri. Repeat for the YOffset. 

Press OkayOK and you should have X and Y tool offsets. 

Now select a master tool. Then for all other tools measure the distance from the master tool in X and Y. Enter those values into the X and Y offsets. 

Tool Spindle Rotation Options

SelectPull down View->Tool Tables...Tables Youto will seeopen the tool table. 

Select Edit->Table Fields.Fields Youto will seeopen the Tool Table Editor. 

Select the User Field option.tab. 

Select Add.Add. 

Setup the tool exactly as shown below:

Press OK.OK. 

Then select View->User Fields.Fields. 

Now for each tool you can select the spindle rotation options. For example, for a probe, you can select No Rotation as shown:

As long as you are build 11028 or later, youYou will now not be able to turn on the spindle with tool 1 loaded.loaded, Youbut will get anthis alarm as follows:alarm: