Skip to main content

SOURCE: License Travel Limits

If you purchased a license with travel limits, you will need to define where you want those limits to be on each axis. 

image.png

You may jog outside of the travel limits, but you will not be able to run any G-Code if the system is outside of those limits.

In the example screen above, the license is limited to 36 inches. The default settings are -36 and 0 on each axis. If you enter a value that exceeds your license, it will leave your starting value in that field and raise an alarm window 

image.png

Determine where you want that travel to fall on each axis. The minimum and maximum distances are from machine zero on each axis.


Pull down Configure | Control and select the Travel Limits tab.

image.png

 

 

Back to top