MachPro Lathe Setup Manual

{{@2007#bkmrk--1}}

MachPro 26 CNC Software Roadmap

Introduction

Please refer to your motion controller's documentation to:

• Establish the network connection to the MachPro computer
• Connect and configure drives
• Connect and configure I/O
• Calibrate the axes
• Establish machine zero
• Configure soft limits
• Calibrate the Spindle

Some of these configuration steps need integration with the MachPro software. The M31 Motion Control Setup Manual includes the information you need for the M31. Compatible motion controllers should complete the  MachPro Compatible Motion Controller Configuration Settings

Languages

{{@2205}}

Spindle Setup

See the M31 or Compatible Spindle Setup documentation

Spindle Calibration

This is primarily for mills where the speeds and feeds are precise, and directly affect the finish and accuracy of the final part. 

Spindle settings

{{@2047}}

Spindle Warm Up

{{@2023}}

Lube System Setup

{{@2046}}

Next Steps

You may need to setup MachPro Advanced features, and you will need to use the MachPro Lathe Operating Manual to receive the full benefit of the new MachPro features.

{{@2016}}