Skip to main content

MachPro Import Mach3 or Mach4 Configurations

{{@2007#bkmrk--1}}

When you run the installer it will provide a field to select the configuration file to import. Mach3 uses XML files, and Mach4 uses INI files. 

Mach3 configuration import

The Mach3 configuration file will be C:\Mach3\[profile name].xml. Common examples are:

  • Mach3Mill.xml
  • Mach3Turn.xml
  • Plasma.xml

You will usually have multiple xml files on your control. The machine type should match your machine, and that file should have a recent date on it. 

image.png

Browse to the correct file and click Next.

image.png

Before the configuration is imported, you will be provided with a summary of what will be imported. 

Note that we import the signal mappings, but we do not import the ports and pins as those values will change on a new motion controller. You will need to follow the guidance in your motion controller documentation to:

  1. Wire the machine inputs and outputs to the motion controller
  2. Map the signals to the correct device and input names based on how you wired the motion controller. The M31 manual provides that documentation for the M31. MachPro Compatible Motion Controller Configuration Settings provides that documentation for all compatible motion controllers. 

image.png

Mach3 values to be imported

MachPro values as imported

image.png

image.png

image.png

image.png

image.png

All Mach3 outputs are imported as standard outputs on MachPro and can be reconfigured as needed. 

image.png


image.png

 

image.png

image.png


image.png

image.png

Note that motors are now reversed in this config screen

image.png

image.png


 

image.png


image.png

image.png


image.png

Mach4 configuration import

The Mach4 configuration files will be named C:\Mach4\Profiles\[machine type]\machine.ini

The date on your current INI file should be current

image.png

Common machine types are:

  • Mill
  • Router
  • Plasma
  • Turn

Browse to the correct file and click Next.

We import the INI file. Custom screens and scripts are not part of the INI file and we do not import those. 

Go back to the roadmap - complete the pkg install, then configure your motion controller and signal mapping within MachPro. 

{{@2016}}

Back to top