2000 Series Universal Cylindrical Grinder Programming Manual

Internal Subs

O9523 Change Cycle Type

Parameters:

T - Cycle Type

O9524 Change Cycle State

Parameters:

S - Cycle State

O9525 Sparkout Dwell

Parameters:

H - Sparkout time in seconds 

O9528 Update number of passes remaining

Parameters:

E - Remaining Passes

(Acquired from Wheel Setup tab).

#9000             Wheel diameter

#9001             Effective width of wheel

#9002             Overhang

#9003             Minimum diameter of wheel

#9004             Minimum width of wheel

#9005             Working angle of wheel

#9006            Wheel left edge radius

#9007            Relief angle left

#9008            Relief height left

#9009            Wheel right edge radius

#9010            Relief angle right

#9011            Relief height right

#9012            Phase height left

#9013            Phase height right

4.2 Dresser Variables

#9024            Tip radius diamond 1

#9025            Tip radius diamond 2

#9026            Tip radius diamond 3

#9033            Safety clearance on wheel periphery

#9034            Safety clearance on left side of wheel

#9035            Safety clearance on right side of wheel

4.3 Subroutines

O9500          Set dressing flag

O9501          Re-set dressing flag

O9502          Rapid from safety to X clear then part

O9510          Rapid from safety to part

O9511          Rapid from safety to dresser

O9512          Rapid from safety to dresser clear position

O9520          Collision detection

O9521          Error detection (Wheel dia. < min.)

O9522          Error detection (Wheel width < min.)

O9523          Change cycle type

O9524          Change cycle state

O9525          Sparkout dwell

O9526          Activate diamond offsets & store current tool offsets

O9527          Restore tool offsets

O9528          Update number of passes remaining

O9529          G code modals for grinding

O9530          Common setup to start dressing

O9531          Common setup to end dressing

O9532          Update parts per dress logic

O9533          Update parts per dress counter

 

 

Wheel Head Memory

Pound Variable	Description
#9060	Wheel Type
#9000	Diameter
#9001	Effective Width
#9002	Overhang
#9003	Minimum Diameter
#9004	Minimum Width
#9005	Working Angle
#9006	Corner Radius Left
#9012	Phase Height Left
#9007	Relief Angle Left
#9008	Relief Height Left
#9009	Corner Radius Right
#9013	Phase Height Right
#9010	Relief Angle Right
#9011	Relief Height Right
#9012	Phase Height Left
#9013	Phase Height Right
#9014	Max Wheel RPM
#9015	Wheel SFM
#9016	Wheel RPM
#9048#9017	WheelDresser SpeedDiamond ModeType
#9018	X Position Diamond 1
#9019	Z Position Diamond 1
#9020	X Position Diamond 2
#9021	Z Position Diamond 2
#9022	X Position Diamond 3
#9023	Z Position Diamond 3
#9024	Tip Raduis Diamond 1
#9025	Tip Raduis Diamond 2
#9026	Tip Raduis Diamond 3
#9027	Infeed Angle
#9028	Feed Factor 1
#9029	Feed Factor 2
#9030	Xsw Safety Position
#9031	Zs Safety Position
#9032	Xsd Safety Position
#9033	Deta X Safety Clearance
#9034	Deta ZL Safety Clearance
#9035	Deta ZR Safety Clearance
#9036	X Return Clearance
#9037	Z Return Clearance
#9040	Current Commanded RPM
#9041	Wheel Dressing SFM
#9042	Rotary Dresser Roll Diameter
#9043	Rotary Dresser SFM
#9044	Rotary Dresser RPM
#9045	Current Rotary Dresser Rpm
#9046	X Dresser Offset (Optional)
#9047	Rotary Dresser Maximum RPM
#9048	Wheel Speed Mode
#9049	Rotary Dresser Surface Feet Per Min Mode
#9050	Rotary Dresser Direction (0 = FWD,1 = REV)
#9051	Teach New Wheel Dresser Offset 1
#9052	Teach New Wheel Dresser Offset 2
#9060	Wheel Type
#9080	Current Cycle State
#9081	Current Cycle Type
#9082	Current Cycle Passes Remaining
#9083	Parts Per Dress Cycle
#9084	Parts Since Last Dress Cycle
#9085	Part Count On Last Dress Cycle
#9086	Parts Per Dress Cycle Enabled
#9100	Work Head Diameter