2000 Series Universal Cylindrical Grinder Programming Manual

Internal Subs

O9523 Change Cycle Type

Parameters:

T - Cycle Type

O9524 Change Cycle State

Parameters:

S - Cycle State

O9525 Sparkout Dwell

Parameters:

H - Sparkout time in seconds 

O9528 Update number of passes remaining

Parameters:

E - Remaining Passes

(Acquired from Wheel Setup tab).

#9000             Wheel diameter

#9001             Effective width of wheel

#9002             Overhang

#9003             Minimum diameter of wheel

#9004             Minimum width of wheel

#9005             Working angle of wheel

#9006            Wheel left edge radius

#9007            Relief angle left

#9008            Relief height left

#9009            Wheel right edge radius

#9010            Relief angle right

#9011            Relief height right

#9012            Phase height left

#9013            Phase height right

4.2 Dresser Variables

#9024            Tip radius diamond 1

#9025            Tip radius diamond 2

#9026            Tip radius diamond 3

#9033            Safety clearance on wheel periphery

#9034            Safety clearance on left side of wheel

#9035            Safety clearance on right side of wheel

4.3 Subroutines

O9500          Set dressing flag

O9501          Re-set dressing flag

O9502          Rapid from safety to X clear then part

O9510          Rapid from safety to part

O9511          Rapid from safety to dresser

O9512          Rapid from safety to dresser clear position

O9520          Collision detection

O9521          Error detection (Wheel dia. < min.)

O9522          Error detection (Wheel width < min.)

O9523          Change cycle type

O9524          Change cycle state

O9525          Sparkout dwell

O9526          Activate diamond offsets & store current tool offsets

O9527          Restore tool offsets

O9528          Update number of passes remaining

O9529          G code modals for grinding

O9530          Common setup to start dressing

O9531          Common setup to end dressing

O9532          Update parts per dress logic

O9533          Update parts per dress counter

Wheel Head Memory

Pound Variable	Description
#9040	GW Current Wheel RPM
#9045	GW Current Rotary Dresser RPM
#9065	GW Default Dress Amount
#9066	GW Default Dress Passes
#9067	GW Default Dress Feedrate
#9070	GW Dresser Parts Per Dress Cycle
#9071	GW Dresser Parts Since Last Dress
#9080	Current Cycle State
#9081	Current Cycle Type
#9082	Current Cycle Passes Remaining
#9140	RW Current Wheel RPM
#9145	RW Current Rotary Dresser RPM
#9165	RW Default Dress Amount
#9166	RW Default Dress Passes
#9167	RW Default Dress Feedrate
#9170	RW Dresser Parts Per Dress Cycle
#9171	RW Dresser Parts Since Last Dress
#9999	GW Dress program Sub number
#9998	RW Dress program Sub number