Skip to main content

Orion 3000 Controller

__Use__MachMotion_Logo_HiRes_TransBG-update-01-450.png



This manual provides an overview the features of the Orion 3000 controller.

1. Overview

image.png

The Orion 3000 control is an industrial PC control with an integrated 21.5" touch screen and operator panel.

2. Connections

image.png

image.png

3. Features

  • 21.5” LCD,1920*1080,resolution,Multi-touch,Capacitive Touchscreen
  • Full IP65 design
  • 2/4*Glan/4*USB3.0/1*HDMI/2*COM
  • DC12-24V power input
  • Support ARM mounting from TOP side or BOTTOM side
  • Fanless and anodized aluminum

4. Specifications

Category Specification ICP69215-C-H52-4Y
LCD Size 21.5" LCD
Resolution ratio 1920*1080
White Luminance 250cd/m2
MTBF (hour) 30000 hrs
Contrast Ratio 3000:1
Viewing Angle (L)89 / (R)89 / (T)89 / (B)89
Mechanical Dimensions (W x H x D) 553mm x 387.5mm x 135mm
Installation Swing ARM mounting (Support NODKA 4460 square tube and Rittal CP 40)
Buttons Default: 1x Emergency, 1x selection, 1x red push, 1x green push, 1x Key switch
Weight 9.0 Kg
System CPU Intel® Core™ 10-11th i5/i3, LGA1200, Max.35W
Memory 2 x 260-pin DDR4 SODIMM, Max support 32GB
Storage 1 x 2.5" HDD/SSD + 1 x mSATA
Network (LAN) 4 x Intel 1000Mbps Ethernet
HDMI HDMI 1.2
Serial ports 2 x RS232/485 (optional), 2 x 3-pin Phoenix Connector
USB 4 x USB (3.0/2.0/1.0)
Touch screen Touch screen type Capacitive Touch screen
Communication interface USB
Transmittance ≥87%
OS OS Windows 7, Windows 10 IoT, Ubuntu, CentOS
Power Consumption Input Voltage

12-24VDC ±10%; reverse connection, over-voltage, over-current protection;

1x 2-pin Phoenix DC (internal);

1x power button with light (back)
Idle Power Consumption Minimum 35W
Environment Operating Temperature 0°C ~ 50°C for SSD; 0°C ~ 45°C for HDD
Storage Temperature -20°C ~ 60°C
Humidity 5~95% @ 40°C (non-condensing)
Vibration SSD applied: 1.5 Grms, IEC 60068-2-64, random, 5~500 Hz, 1 hr/axis
Shock Operating 10G peak acceleration (11ms duration), follow IEC 60068-2-27
EMC Class B
IP rating Full IP65

5. Mechanical Drawings

image.png

6. Operator Panel

image.png

Emergency Stop should be used in the event of an emergency and as a safety precaution any time the machine isn't running. Emergency Stop will not lose position of machine or require rehoming.

Cycle Start can be used to start a G-Code file and is also used to start other commands such as MDI and GoTo Commands.

Feed Hold is used to pause motion during file run and will leave the spindle on. Cycle start will resume motion and continue file execution. 

Reset is used to clear alarms and set the machine back to default modals. These defaults can be changed in the Initialization Codes sections of the default control configuration. Reset also does a full cycle stop and rewinds the GCode file.

F1 and F2 can be configured for user selected features. 

USB two USB A ports

Jog - and Jog + are integrated with on-screen controls where you can select the axis to be jogged

Warranty Information

MachMotion warranty policy is subject to change. Updated information is available at our website:
https://machmotion.com/warranty

 

The MachMotion Team
http://www.machmotion.com
14518 County Road 7240, Newburg, MO 65550
(573) 368-7399 • Fax (573) 341-2672

Back to top