2000 Series Product Manual
1. Overview
The 2000 series control is an Industrial PC control with an integrated 21.5" touch screen and membrane operator panel.
2. Connections
1. Machine interface
These are the only required connections to make to the control before you turn it on.
|
Cable |
Function |
|
Blue EtherCAT Cable |
Connection to EtherCAT Network (EtherCAT Servo Drives) |
|
Green Ethernet Cable |
Connection to Ethernet IP Network (VFD, PLC, Motion Control) |
|
Blue Ethernet Cable |
Internet |
|
Black Cable |
Control Power and Estop |
2.User Available USB
External USB on the face of the control for loading files with a Flash Drive or temporary use with any other auxiliary USB device. Internal USB ports for wired keyboard and mouse also used for the wireless.
Two internal ports for wired keyboard and mouse or other permanent USB devices.
One External port underneath the keyboard tray for wireless keyboard and mouse.
3. Specifications
1. Data Sheet
|
Item |
Specification |
|
Power Source |
DC 15V- 30V 6.5A |
|
Operating Temperature |
32°F-105°F |
|
|
|
|
Operating System |
Microsoft Windows IOT (Compare to Windows 10) |
|
Software Package |
MachMotion Control Software Installed, Powered By Mach4 Software Core |
|
Processor |
Intel I3 (2.7GHz) |
|
Hard Drive |
64 GB Solid State, mSATA |
|
RAM |
8 GB |
| Wifi |
External antenna |
|
Ethernet LAN (RJ45) Port |
1 (Networking and internet) |
|
USB Ports |
1 (External) 2 (Internal) |
|
Monitor |
21.5" Capacitive Touch Color LCD |
|
Resolution |
1920 X 1080 |
|
Keyboard |
Wireless - Full QWERTY with numpad |
|
Mouse |
Wireless - Optical mouse with scroll wheel |
|
Enclosure |
|
|
Dimensions |
23.125"(W) X 20.0"(H) X 3.25"(D) |
|
Material |
18 Gauge Steel, Powder Coated Skin. Machined Aluminum Face |
|
Weight |
46.5 Pounds |
|
Operator Interface |
|
|
X15-14-21 Operator Panel |
Membrane button panel with Jog, Spindle, Coolant, Feed selections, Emergency Stop, Cycle Start, Feed Hold, and Reset Buttons |
| X15-41-01 Wireless Pendant (Optional) | Wireless Hand-wheel |
2. Mechanical Drawings
4. Operator Panel
1. Estop
Estop should be used in the event of an emergency and as a safety precaution any time the machine isn't running. Estop will not lose position of machine or require rehoming
2. Cycle Control
Cycle Start can be used to start a GCode file and is also used to start other commands such as MDI and GoTo Commands.
Feed Hold is used to pause motion during file run and will leave the spindle on. Cycle start will resume motion and continue file execution.
3. Cycle Cancels
Retract is an optional feature that can be set up to retract the tool and stop the spindle
Cycle stop does a full cancel of the file, turns off the spindle and coolant, and puts the machine in idle.
Reset is used to clear alarms and set the machine back to default modals. It also does a full cycle stop and rewinds the GCode file
4. Feed Rate Overrides
The Feedrate Override knob will modify Feedrate Override percent and will affect any G01 feed rate moves.
The 4 Rapid Override buttons will set the Rapid Override percent and will affect any G00 rapid rate moves.
5. Spindle Control
Spindle control buttons let you directy set the spindle forward backwards and stop. These are equivelint to calling M3, M4, and M5.
6. Function Buttons
7. Jog Selection
CONT will put all jogging into continues mode and will continue to jog as long as you hold the jog button.
X1, X10, and X100 are incremental jogs and will move the incremental distances configured in Config -> Control
8. Jog Group
5. Warranty Information
MachMotion warranty policy is subject to change. Updated information is available at our website:
https://machmotion.com/warranty
The MachMotion Team
http://www.machmotion.com
14518 County Road 7240, Newburg, MO 65550
(573) 368-7399 • Fax (573) 341-2672