RapidChange Tool Changers

RapidChangeATC provides a family of tool changers that work with a wide range of machines that do not have a traditional tool changer option. 

Configure a RapidChangeATC tool changer on MachPro

1. Set the Tool Changer to RapidChangeATC. Pull down Configure -> Control -> Settings tab. Filter for Toolchange
2. Change Tool Changer Machine Brand Specific Operations to RapidChangeATC and click OK to save your changes
3. Install the MachPro module from RapidChangeATC
4. Follow RapidChangeATC's MachPro configuration instructions