Search Results

Overview The gang spindle parameters allow multiple spindles to be locked together in their run state and commanded RPM, compiling all of their feedback into a single unit. In this way, one speed can be set that will be distributed to all spindles in the grou...

If you run across one of these and don't know how to set it up, this worked for me. Make sure that Modbus control is disabled on V1000_0 in the MM plugin! Set the up the VFD as shown here, Use RPM instead of percentage. Note: Not sure this is correct. T...

This document is not for setting up the multiple grinder heads. This document is a guide for setting up a main spindle and subspindle using the 2000 series VFD parameters. It assumes that the VFDs are already properly programmed and communicating on different...

These instructions apply to all VFDs where the spindle is controlled through the Mach4 Control Spindle tab Why calibrate your spindle? Does your CNC control need it? Yes - it needs to be accurate enough to meet your needs.  The rated speeds and feeds for ...

These instructions apply to all VFDs where the spindle is controlled through the MachPro Control Spindle tab Why calibrate your spindle? Does your CNC control need it? Yes - it needs to be accurate enough to meet your needs.  The rated speeds and feeds fo...