Wiggle Lead In (SheetCAM)

Here are a few screen shots of menus from sheetcam and an explanation of how to set up a wiggle/oscillation:

The number of wiggles is calculated from the pierce time, feed rate and wiggle length. 


You also need some type of lead in defined in the operation.


Attached is an example file with wiggle lead in (attachment on right side)

Keywords: 13479

Revision #5
Created Sun, Jul 30, 2017 11:36 AM by MachMotion
Updated Fri, Dec 18, 2020 3:06 PM by Josiah Ymker