Hardware Check Hanging in Ultimate Screen
Description of the problem:
When starting Mach3, the Ultimate screen may get hung up on hardware check.
The most common known issue is that Mach3 is not running as an administrator. Follow these steps:
1. Close Mach3
2. Right-click on the desktop icon for Mach3 and select Properties
3. Select the Compatibility tab
4. Check "Run this program as an administrator"
5. Click [OK] to save changes
6. Open Mach3
Make sure under Compatibility mode, make sure the box is checked next to "Run this program in compatibility mode for:" and select the appropriate Windows version that is being used.
Keywords: 7598, Ultimate screen locks up, freeze, mach 3