Corner Freeze - Mach3 Plasma

Description of the problem:

Do MachMotion plasma controls have corner freeze? How does it work?



MachMotion THC systems have the corner freeze feature built in. It is automatic and there are no settings that need to be set to enable it.

If you are using a third party THC with our control you can select an output to turn on when the control is slowing down around corners.

To set up this feature:
  1. Go to Plugin Control->MachMotion Config->I/O Configuration
  2. In the Corner Freeze box select the output to be used
  3. Set the Less < % of feedrate value to the percentage drop above which the corner freeze will activate (for example, if it is set to 5% any time the feed rate drops below 95% of commanded it will turn the output on)
Keywords: 7627