SOURCE - Run From Here

Run From Here\File Resume:

  1. Use the Up/Down arrows in the G-Code file window to select the line to start from 
  2. Press the [Run From Here] or [File Resume] button 
  3. Select the [Change to Needed Tool] button if applicable (See Image Below)
  4. Enter desired value in the Feed Rate field (See Image Below)
  5. Select axis to move and press [Move Selected] button (See Image Below) to move the axis into position
  6. Select desired Auxiliary Settings and press [Turn On Selected Auxiliaries] button 
  7. Press [Cycle Start] to begin the file at selected starting line File Resume - If selected this will start the program at the selected gcode line and resumes the file

    Figure-9---Run-from-here.JPG
Back to top