Machine Forms
Documentation of issues on machines, things we observed and how we solved them. This Book was made in an effort to eventually document every possible issue on a machine and provide a solution. Please feel free to add!
Discrepancies
Context- Any information about the machine that may be relevant to the issue. Discrepancy- Wha...
Yaskawa GA500 VFD decel time issue
Context- Rapidpath everything. "Centerline Systems" Multicam Router-21585 Discrepancy- Yaskawa G...
Rapidpath Enabling error with Ethercat Leadshine Stepper and Ethercat GA500 VFD
Context- Rapidpath everything. Leadshine Stepper Carousel Tool Changer. "Centerline Systems" Mult...
Pokeys always failed to connect on the first power up after the cabinet was turned off.
Context- Custom Surface Grinder (Radius Grinder Profile). A lot of copied over data from previous...
Spindle runs poorly and at the wrong speed even after all Spindle info parameters were changed
Context- Rapidpath GA500 VFD. Brand new HSD ES951 A 1112 S Spindle. "Mastercraft" Komo Router-214...
A.100 Alarm occurs during auto-tuning of Yaskawa Servo
Context- X Axis (Single ball-screw table). Sigma-7 Motor and Drive combo. "Mastercraft" Komo Rout...
LUA Syntax error occurs right after creating the first PMC of an install.
Context- "Wyoming Machine" Lucas Boring Mill-21073 Discrepancy- A LUA Syntax error happens immed...
Invert Z Axis (Positive is towards the material)
Common on MultiCAM routers. Invert Z in the software. Change home location, soft limits, etc. ...
Requirements
This Chapter will lay out exactly what is required to make each outlined system function.