Verify Homing

Description of the problem:

The control won't run a program without homing, or it will run and you don't want it to.

Mach4 Solution:

In the MachMotion plugin is a setting for this. Look under the configure menu option, then plugins, then machmotion plug. Find the option for the safety homing interlock and set it for the desired state.

Mach3 Solution:

To change whether or not homing is required to run files:
  1. Go to Operator->VB Script Editor
  2. Open the file C:\Mach3\macros\[your profile]\VerifyHoming.m1s
  3. On the third line of that program change the value of DisableCheck. 1 = Homing is required. 0 = Homing is not required.

Keywords: 7664

Back to top