Tool Change Option-Mach3

Description of the problem:

My setting for "Ignore Tool Change" keeps changing back to "Stop Spindle. Wait for Cycle Start."
 
Solution:
The Cycle Start macro is likely changing the setting. Follow these steps:
 
     1. Select Operator -> VB Script Editor
     2. Select File -> Open File.. and open CycleStart.m1s
     3. Check for the presence of the following code:
          If GetOEMLED(53) Then 'Ignore Tool Change ON LED

     DoOEMButton(168) 'Toggle Ignore Tool Change
     End If

     4. Delete the above code if present
     5. Select File -> Save and close the editor
 
 
Keywords: 7758
Back to top