Program Safety Lockout-Mach3

Description of the problem:

What is program safety lockout?


Program safety lockout prevents any movement while input #1 is active. This requires a hardware input. An example of how this could be used would be to prevent jogging during a drill cycle when the drill is raised/lowered pneumatically.
To activate program safety lockout go to Config->General Config and check the bottom check box in the first column.
Keywords: 7667

Revision #5
Created Thu, Jul 27, 2017 1:12 PM by Aaron
Updated Wed, Jul 24, 2019 8:38 PM by Josiah Ymker