Pendant is Jogging Roughly - Mach3

Description of the problem:

The pendant is not jogging smoothly. 
 
Solution:

Four possible solutions:

 
    1. Verify the pendant is connected securely
    2. Verify the step increment is set to 4 and the velocity to 1000 in Config -> Ports and Pins
Mach3-Config-PortsandPins-EncoderMPG's.jpg
    3. Verify no MPG brains are enabled located in Operator -> Brain Control
    4. Verify no Fast Encoders are enabled in the Pokeys plugin
 
Keywords: 7642
 
Back to top