Open G-Code in Command Prompt - Mach4

Command Lines to Open and Close a G-Code File in Mach4:

Open:
C:\Mach4\tools\MachUtil\MachUtil.exe --open-gcode "C:\Mach4\GCodeFiles\Bolt Pattern.tap"

Close:
C:\Mach4\tools\MachUtil\MachUtil.exe --close-gcode

 

Keywords: gcode, cmd, mach4


Revision #4
Created Mon, Sep 11, 2017 2:03 PM by MachMotion
Updated Fri, Jul 26, 2019 4:27 PM by Josiah Ymker