Open Electrical Cabinet With Power ON

Here are the steps to open the electrical cabinet without having to shut down power:

DANGER: High Voltage Present. Death or Serious Injury Can Occur.

  1. You will need a small allen wrench or a small screw driver.
  2. Locate the small push pin located near the OFF labeling of the door switch.
  3. Push in the pin with the tool while pulling the handle towards you.
    • Note: Do not turn the switch to off. This technique should allow you to defeat the interlock so you can open the door with the switch in the ON position.

 

Door-Switch-b-2.JPG

zkvDoor-Switch-a-2.JPG

 

 

Keywords: bypass, enclosure, override

Back to top