Mitsubishi Drive Programming

  • Press Mode until it displays: P  00 (or some P range between 00-19)
  • Press up/down arrow keys until desired parameter is displayed
  • Press Set to view the setting for that parameter
  1. To Change the Parameter
  • Press Set again (display should now be blinking)
  • Use up/down arrow keys to change the parameter value
  • Press set to store/save
  • Press up/down arrow keys to go to other parameters
  • Power cycle to the drive to ensure update of the parameter
  • To view other parameters press up/down arrow keys or press Mode to cycle display

9708


Revision #2
Created Thu, Jul 27, 2017 1:30 PM by Aaron
Updated Wed, Jul 24, 2019 9:20 PM by Josiah Ymker