MachMotion Plugin Data Logging

Description of the problem:

Instructions on how to enable data logging with the MachMotion plugin.
To be able to use data logging you first must have MachMotion plugin version 4.18 or later.
To set it up in Mach3:
  1. Go to PlugIn Control->MachMotion Config->Special Functions
  2. There is a check box for "Enable Debugging." This will turn on the data logging
The logs will be stored in C:\Mach3\Data Logs. The data files are organized by date and by profile used. The data log collects values sent to the status bar. The rate that it updates is a little slow though. So if the status bar changes values quickly it will often miss messages.
Keywords: 7657