Kernel Speed Error

Description of the problem:

You have a HiCON/Apollo III system that is getting a error message complaining about the kernel speed, similar to this:
 Mach3-Kernel-Speed-Error.jpg
 

Solution:

The problem is most likely caused by incorrectly setting the communication protocol. Follow these steps to correct it:
 
    1. Go to Function Cfg's -> Reset Device Sel...
    2. Press [OK] and restart Mach3
    3. Select the M3HiCON device
Mach3-Motion-Control-Options.jpg
    4. Also check the "Don't ask me this again" box
    5. Click [OK]
 
Keywords: 7641
Back to top