How to Turn Off Home In Place - Mach4

Home in place is a feature that allows axes to home in their current position. This is usually used for testing purposes or if you will not be using limit/homing switches. (NOTE* MachMotion strongly recommends only running with homing/limit switches).

This option must be turned off for setting up your machine to home off a limit switch.

Go to Configure>Mach menu option, then select the Homing/Soft Limits and un-check "Home In Place" for each axis.

Home_in_Place_Highlight.PNG

 

Keywords: Homing in place, doesn't home, no movement when homing

 

Back to top