Global Messaging - Mach4

Global Messaging Version 3

1. Access Global Messaging

To setup Global Messaging go to Configuration -> Plugin -> Global Messaging System.

global_messaging_config.png

2. Message Control

global_messaging_control.png

There are five actions that can be done on a message: create, delete, duplicate, import, and export.

To create a new message, press the green plus button. This will add an unnamed alarm message to the list and select it for editing.

To delete a message from the list, select the message to be deleted and press the red X button. This will remove the message from the list and then select the next message.

To create a copy of a message, select the message to be duplicated from the list and press the button with the two papers on it. This will add a new message to the list with all settings copied from the selected message.

To import messages, press the button with the downwards arrow. You will be asked to select and INI file that contains the messages you want to import. After selecting the file, the messages that are in that file will be added to the list. If there are any messages currently configured that are duplicated, the control will ask if you would like to overwrite the existing messages.

To export messages, press the upwards arrow button. You will be asked to select which messages you wish to export, and then asked for a file location to save them to.

The message selected in the leftmost list is the one actively being edited.

 

3. Configure Action

There are four classes of actions that a message can fall under: Alarm, Warning, Notice, and Process. An alarm can take emergency actions, such as disabling or turning off power. A warning has many actions it can do, and will always prevent cycle start from being pressed while a warning is active. A notice takes no actions, but presents the operator with a message. A process has all the same potential actions a warning has, but does not alert the operator and does not prevent cycle start.

global_messaging_warning_actions.png

After selecting the action class, you can select the more specific action this message will do when activated. For example, I have selected "Class: Alarm" and now I want the "Action: Disable Software".

Some actions allow you to select a secondary action. For instance, a warning with "Action: Escalate to Alarm" allows you to select what alarm action you would like to take. There is a field for 'Action Timing', which is how many milliseconds after the first action that the second action will happen.

Additionally, you can set the actions to repeat while the message is active. The message will do the first action again, and wait the appropriate time before doing the second action (if there is one configured). This process will loop while the message is active.

global_messaging_action.png

3a. Custom Actions

global_messaging_custom_action.pngIf none of the standard actions suit your purposes, you can also create custom actions. This can only be done for the Warning and Process classes of messages. To create a custom action, select 'Custom' from the action list, and then click on the "Customize" button next to the action. This button is only enabled when you select the Custom item from the action list. Pressing this button will open a new window.

Here you can create a list of things to happen when the message activates. You first select and action type, fill out the details about the action, and then press "Add Action". This list can be reordered by selecting an item and using the arrow buttons to move them up or down and the red x to remove them from the list.

global_messaging_custom_action_types.png

An item can be double-clicked on to be edited, and then you should press "Update Action" to save your changes.

Items will be resolved sequentially in the order they appear in the list, with no pauses in between items.

 

4. Setup Details

global_messaging_details.png

Most messages will display an alert when the message conditions activate. The information displayed for the alert are edited in the details section of the message.

This same section is where you can also password protect a message. The password will be needed for editing and clearing the message.

global_messaging_alert.pngAdditionally, you can create a register that the message will write it's current status to. This will include information about the enabled/disabled state of the message and the idle/active state of the message.

If your selected action is 'Execute Script', this section is where you will set which script to run. The configured script should have a .mcs extension.

Lastly, there is an option to disable the entire message here. The message will not be deleted, but it will not check conditions or activate until the message is re-enabled.

5. Set Conditions

A message will do its configured action based on the conditions that are set for it. To edit these conditions, you will need to select the 'Edit Conditions' button. The following window will be displayed.

global_messaging_conditions.png

Conditions are made up of sets and items, where each set can contain items and subsets. Sets determine what logic to use on the items and subsets they contain. There are three options for sets: AND, OR, and NOT. An AND set requires all of its items and subsets to be true before it will say it is true. An OR set only requires that at least one of its items or subsets is true for it to be true. A NOT set requires that all items and subsets are false, in order for it to be true. By combining these sets, complicated logic can be created.

Most messages will only need a single AND set. To add a new set, select the parent set it should belong to and the set type from the list, and press 'Add Set'.

global_messaging_condition_types.pngTo add an item to a set, select the item type from the drop down and fill in the details, then press 'Add Condition'.

A common condition is to require the machine to be enabled. To add this condition, select condition type of signal, then output signals, and then machine enabled. After those are selections are made, press 'Add Condition'.

To edit a set, double click on it in the left-hand display. This will allow you to change the set type and press update. Similarly, you can double click on a condition to edit and update the condition.

Pressing 'OK' will save changes and 'Cancel' will discard all changes.

global_messaging_condition_enabled.png

6. Save Changes

Pressing 'Save' will save all messages and exit config. Pressing 'Cancel' will discard all changes and exit config.

global_messaging_saveandclose.png

 

Keywords: 14530

Back to top