Corner Freeze - Mach3 Plasma

Description of the problem:

Do MachMotion plasma controls have corner freeze? How does it work?

 

Solution:

MachMotion THC systems have the corner freeze feature built in. It is automatic and there are no settings that need to be set to enable it.
 

If you are using a third party THC with our control you can select an output to turn on when the control is slowing down around corners.

 
To set up this feature:
  1. Go to Plugin Control->MachMotion Config->I/O Configuration
  2. In the Corner Freeze box select the output to be used
  3. Set the Less < % of feedrate value to the percentage drop above which the corner freeze will activate (for example, if it is set to 5% any time the feed rate drops below 95% of commanded it will turn the output on)
 Mach3-Plugin-MachMotion-IO-Config-Corner-Freeze.png
 
Keywords: 7627
Back to top