1050 Control Installation

__Use__MachMotion_Logo_HiRes_TransBG-update-01-450.png




1050-control.jpg

1 Introduction

1.1  Overview

System Components:

  • 1050 Control
  • Documentation Packet
    • System backup USB drive
      • When the retrofit is complete, copy the entire c:\Mach4\ folder to the USB drive and keep in case a restore is ever needed. If a USB drive was not included, you can use a 2GB or larger USB drive.
    • Backup copies of software installed on the control
    • System documentation
    • Control Information Packet

Keep the packet and its contents in a safe place.

1.2  Specifications

See Appendix for control details and specifications.

1.3 Requirements

Power requirements for the 1050 control are 100VAC-240VAC, 50-60Hz.

1.4 Tools Required

  • none

2. Assembly

Begin by making the following connections as directed in the following figure and table:


1050-pc-connections.JPG

Figure 1 – PC Connections

Cable

Function

Reference

Green Ethernet Cable

Connection to Motion Controller

1

Blue Ethernet Cable

Internet

2

Black Three-Prong Plug

Control Power

3

White Connector

E-Stop (from operator panel)

 

Table 1 - Wiring Reference

  1. Plug the power plug into the indicated connector.
  2. Plug the RJ45 plugs into the indicated connectors.
  3. Attach the white rectangular E-Stop cable.

estop-connector.JPG
Figure 2 – E-Stop connector

3. Control startup

Locate the keys in the white documentation box that came with the control.

keys.jpg
Figure 3 - KEYS

Place one key into the keyhole at the back right hand side of the control as pictured below. Turn on the computer by rotating the key and then quickly releasing it.

key-hole.jpg
Figure 4  - PC START

4. Shutting Down the Control

Note: Do not turn the key until the control’s software has completely shut down. Also, do not remove power from the machine until the control is completely off.

To power down the control, rotate and release the key on the back right hand side of the control. Do not hold the key in the turned position, let it spring back immediately.

The system can also be shut down by clicking on the [Start] menu and then pressing [Shut Down]. The MachMotion control will turn off

 

5. Appendix

5.1 Specifications

Item

Specification

Power Source

AC 100VAC – 240VAC  50/60 Hz 1.3A

Operating Temperature

32°F-140°F

 

 

Computer 

X15-120 PC

Operating System

Windows 7 Embedded

Processor

Intel J1900 2.0GHz (Quad core)

Hard Drive

64 GB Solid State, mSATA

RAM

8 GB

I/O Ports

 

VGA Port

1

Display Port

1

Ethernet LAN (RJ45) Port

3

USB Ports

4 (3 – USB2.0/1 – USB 3.0)

Audio I/O

1

Monitor

17” Color LCD

Keyboard

Retractable

Power Supply

5VDC (6A) & 12VDC (2A)

 

 

Enclosure

 

Dimensions

24"(W) X 15.5"(H) X 6.5"(D)

Material

18 Gauge Steel, Powder Coated

 

 

Operator Interface

 

X15-10-01 Operator Panel

Jog Buttons, Selector Switches, Emergency Stop, Cycle Start, & Feed Hold Buttons

X15-20-01 Pendant (Optional)

Hand-wheel & Selector Switches

 

Warranty Information

MachMotion warranty policy is subject to change. Updated information is available at our website:
https://machmotion.com/warranty

 

The MachMotion Team
http://www.machmotion.com
14518 County Road 7240, Newburg, MO 65550
(573) 368-7399 • Fax (573) 341-2672

Back to top