MachMotion Parameters

Parameters

Parameters are where many of the features and machine functions are setup.  There are many common parameters that are the same across all machine types, but each machine type can have additional parameters for machine specific settings.

Viewing and Modifying Parameters

Navigate to the Service Page -> Maintenance Page and click on Interface Config

Mx8Control-Parameters-Nav.png

Now you can view and edit any of the Parameters.  Use the Predefined Filters or enter your own search terms in the Filter box. 

Control-Parameters.png

Modifying GoTo Positions

Navigate to the Service Page -> Maintenance Page and click on Interface Config

Mx8Control-Parameters-Nav.png

Now select the GoTo Positions tab. 

image.png


You can add a new GoTo Position or modify an existing position. Select Add New to add a new GoTo Position or to modify an existing GoTo Position, select the one you want to modify and then enter in your new position for X, Y, or Z.

You can change the sequence of each move and select what position you want that mapped to (tool change, part zero, or park position). 

image.png

image.png


Revision #9
Created 29 October 2020 22:37:52 by Andy
Updated 7 September 2023 23:16:25 by Andy